Options to Control Diagnostic Messages Formatting#
Traditionally, diagnostic messages have been formatted irrespective of the output device’s aspect (e.g. its width, …). You can use the options described below to control the formatting algorithm for diagnostic messages, e.g. how many characters per line, how often source location information should be reported. Note that some language front ends may not honor these options.
- -fmessage-length=n#
Try to format error messages so that they fit on lines of about
n
characters. Ifn
is zero, then no line-wrapping is done; each error message appears on a single line. This is the default for all front ends.Note - this option also affects the display of the
#error
and#warning
pre-processor directives, and thedeprecated
function/type/variable attribute. It does not however affect thepragma GCC warning
andpragma GCC error
pragmas.
- -fdiagnostics-plain-output#
This option requests that diagnostic output look as plain as possible, which may be useful when running dejagnu or other utilities that need to parse diagnostics output and prefer that it remain more stable over time.
-fdiagnostics-plain-output
is currently equivalent to the following options:-fno-diagnostics-show-caret
-fno-diagnostics-show-line-numbers
-fdiagnostics-color=never
-fdiagnostics-urls=never
-fdiagnostics-path-format=separate-events
In the future, if GCC changes the default appearance of its diagnostics, the corresponding option to disable the new behavior will be added to this list.
- -fdiagnostics-show-location=once#
Only meaningful in line-wrapping mode. Instructs the diagnostic messages reporter to emit source location information once; that is, in case the message is too long to fit on a single physical line and has to be wrapped, the source location won’t be emitted (as prefix) again, over and over, in subsequent continuation lines. This is the default behavior.
- -fdiagnostics-show-location=every-line#
Only meaningful in line-wrapping mode. Instructs the diagnostic messages reporter to emit the same source location information (as prefix) for physical lines that result from the process of breaking a message which is too long to fit on a single line.
- -fdiagnostics-color[=WHEN]#
Use color in diagnostics.
WHEN
isnever
,always
, orauto
. The default depends on how the compiler has been configured, it can be any of the aboveWHEN
options or alsonever
ifGCC_COLORS
environment variable isn’t present in the environment, andauto
otherwise.auto
makes GCC use color only when the standard error is a terminal, and when not executing in an emacs shell. The forms-fdiagnostics-color
and-fno-diagnostics-color
are aliases for-fdiagnostics-color=always
and-fdiagnostics-color=never
, respectively.The colors are defined by the environment variable
GCC_COLORS
. Its value is a colon-separated list of capabilities and Select Graphic Rendition (SGR) substrings. SGR commands are interpreted by the terminal or terminal emulator. (See the section in the documentation of your text terminal for permitted values and their meanings as character attributes.) These substring values are integers in decimal representation and can be concatenated with semicolons. Common values to concatenate include1
for bold,4
for underline,5
for blink,7
for inverse,39
for default foreground color,30
to37
for foreground colors,90
to97
for 16-color mode foreground colors,38;5;0
to38;5;255
for 88-color and 256-color modes foreground colors,49
for default background color,40
to47
for background colors,100
to107
for 16-color mode background colors, and48;5;0
to48;5;255
for 88-color and 256-color modes background colors.The default
GCC_COLORS
iserror=01;31:warning=01;35:note=01;36:range1=32:range2=34:locus=01:\ quote=01:path=01;36:fixit-insert=32:fixit-delete=31:\ diff-filename=01:diff-hunk=32:diff-delete=31:diff-insert=32:\ type-diff=01;32:fnname=01;32:targs=35
where
01;31
is bold red,01;35
is bold magenta,01;36
is bold cyan,32
is green,34
is blue,01
is bold, and31
is red. SettingGCC_COLORS
to the empty string disables colors. Supported capabilities are as follows.error=
SGR substring for error: markers.
warning=
SGR substring for warning: markers.
note=
SGR substring for note: markers.
path=
SGR substring for colorizing paths of control-flow events as printed via
-fdiagnostics-path-format=
, such as the identifiers of individual events and lines indicating interprocedural calls and returns.range1=
SGR substring for first additional range.
range2=
SGR substring for second additional range.
locus=
SGR substring for location information,
file:line
orfile:line:column
etc.quote=
SGR substring for information printed within quotes.
fnname=
SGR substring for names of C++ functions.
targs=
SGR substring for C++ function template parameter bindings.
fixit-insert=
SGR substring for fix-it hints suggesting text to be inserted or replaced.
fixit-delete=
SGR substring for fix-it hints suggesting text to be deleted.
diff-filename=
SGR substring for filename headers within generated patches.
diff-hunk=
SGR substring for the starts of hunks within generated patches.
diff-delete=
SGR substring for deleted lines within generated patches.
diff-insert=
SGR substring for inserted lines within generated patches.
type-diff=
SGR substring for highlighting mismatching types within template arguments in the C++ frontend.
- -fdiagnostics-color#
Default setting; overrides
-fno-diagnostics-color
.
- -fdiagnostics-urls[=WHEN]#
Use escape sequences to embed URLs in diagnostics. For example, when
-fdiagnostics-show-option
emits text showing the command-line option controlling a diagnostic, embed a URL for documentation of that option.WHEN
isnever
,always
, orauto
.auto
makes GCC use URL escape sequences only when the standard error is a terminal, and when not executing in an emacs shell or any graphical terminal which is known to be incompatible with this feature, see below.The default depends on how the compiler has been configured. It can be any of the above
WHEN
options.GCC can also be configured (via the
--with-diagnostics-urls=auto-if-env
configure-time option) so that the default is affected by environment variables. Under such a configuration, GCC defaults to usingauto
if eitherGCC_URLS
orTERM_URLS
environment variables are present and non-empty in the environment of the compiler, ornever
if neither are.However, even with
-fdiagnostics-urls=always
the behavior is dependent on those environment variables: IfGCC_URLS
is set to empty orno
, do not embed URLs in diagnostics. If set tost
, URLs use ST escape sequences. If set tobel
, the default, URLs use BEL escape sequences. Any other non-empty value enables the feature. IfGCC_URLS
is not set, useTERM_URLS
as a fallback. Note: ST is an ANSI escape sequence, string terminatorESC \
, BEL is an ASCII character, CTRL-G that usually sounds like a beep.At this time GCC tries to detect also a few terminals that are known to not implement the URL feature, and have bugs or at least had bugs in some versions that are still in use, where the URL escapes are likely to misbehave, i.e. print garbage on the screen. That list is currently xfce4-terminal, certain known to be buggy gnome-terminal versions, the linux console, and mingw. This check can be skipped with the
-fdiagnostics-urls=always
.
- -fno-diagnostics-show-option#
By default, each diagnostic emitted includes text indicating the command-line option that directly controls the diagnostic (if such an option is known to the diagnostic machinery). Specifying the
-fno-diagnostics-show-option
flag suppresses that behavior.
- -fdiagnostics-show-option#
Default setting; overrides
-fno-diagnostics-show-option
.
- -fno-diagnostics-show-caret#
By default, each diagnostic emitted includes the original source line and a caret
^
indicating the column. This option suppresses this information. The source line is truncated ton
characters, if the-fmessage-length=n
option is given. When the output is done to the terminal, the width is limited to the width given by theCOLUMNS
environment variable or, if not set, to the terminal width.
- -fdiagnostics-show-caret#
Default setting; overrides
-fno-diagnostics-show-caret
.
- -fno-diagnostics-show-labels#
By default, when printing source code (via
-fdiagnostics-show-caret
), diagnostics can label ranges of source code with pertinent information, such as the types of expressions:printf ("foo %s bar", long_i + long_j); ~^ ~~~~~~~~~~~~~~~ | | char * long int
This option suppresses the printing of these labels (in the example above, the vertical bars and the ‘char *’ and ‘long int’ text).
- -fdiagnostics-show-labels#
Default setting; overrides
-fno-diagnostics-show-labels
.
- -fno-diagnostics-show-cwe#
Diagnostic messages can optionally have an associated CWE identifier. GCC itself only provides such metadata for some of the
-fanalyzer
diagnostics. GCC plugins may also provide diagnostics with such metadata. By default, if this information is present, it will be printed with the diagnostic. This option suppresses the printing of this metadata.
- -fdiagnostics-show-cwe#
Default setting; overrides
-fno-diagnostics-show-cwe
.
- -fno-diagnostics-show-rules#
Diagnostic messages can optionally have rules associated with them, such as from a coding standard, or a specification. GCC itself does not do this for any of its diagnostics, but plugins may do so. By default, if this information is present, it will be printed with the diagnostic. This option suppresses the printing of this metadata.
- -fdiagnostics-show-rules#
Default setting; overrides
-fno-diagnostics-show-rules
.
- -fno-diagnostics-show-line-numbers#
By default, when printing source code (via
-fdiagnostics-show-caret
), a left margin is printed, showing line numbers. This option suppresses this left margin.
- -fdiagnostics-show-line-numbers#
Default setting; overrides
-fno-diagnostics-show-line-numbers
.
- -fdiagnostics-minimum-margin-width=width#
This option controls the minimum width of the left margin printed by
-fdiagnostics-show-line-numbers
. It defaults to 6.
- -fdiagnostics-parseable-fixits#
Emit fix-it hints in a machine-parseable format, suitable for consumption by IDEs. For each fix-it, a line will be printed after the relevant diagnostic, starting with the string ‘fix-it:’. For example:
fix-it:"test.c":{45:3-45:21}:"gtk_widget_show_all"
The location is expressed as a half-open range, expressed as a count of bytes, starting at byte 1 for the initial column. In the above example, bytes 3 through 20 of line 45 of ‘test.c’ are to be replaced with the given string:
00000000011111111112222222222 12345678901234567890123456789 gtk_widget_showall (dlg); ^^^^^^^^^^^^^^^^^^ gtk_widget_show_all
The filename and replacement string escape backslash as ‘\”, tab as ‘t’, newline as ‘n’, double quotes as ‘"’, non-printable characters as octal (e.g. vertical tab as ‘013’).
An empty replacement string indicates that the given range is to be removed. An empty range (e.g. ‘45:3-45:3’) indicates that the string is to be inserted at the given position.
- -fdiagnostics-generate-patch#
Print fix-it hints to stderr in unified diff format, after any diagnostics are printed. For example:
--- test.c +++ test.c @ -42,5 +42,5 @ void show_cb(GtkDialog *dlg) { - gtk_widget_showall(dlg); + gtk_widget_show_all(dlg); }
The diff may or may not be colorized, following the same rules as for diagnostics (see
-fdiagnostics-color
).
- -fdiagnostics-show-template-tree#
In the C++ frontend, when printing diagnostics showing mismatching template types, such as:
could not convert 'std::map<int, std::vector<double> >()' from 'map<[...],vector<double>>' to 'map<[...],vector<float>>
the
-fdiagnostics-show-template-tree
flag enables printing a tree-like structure showing the common and differing parts of the types, such as:map< [...], vector< [double != float]>>
The parts that differ are highlighted with color (‘double’ and ‘float’ in this case).
- -fno-elide-type#
By default when the C++ frontend prints diagnostics showing mismatching template types, common parts of the types are printed as ‘[…]’ to simplify the error message. For example:
could not convert 'std::map<int, std::vector<double> >()' from 'map<[...],vector<double>>' to 'map<[...],vector<float>>
Specifying the
-fno-elide-type
flag suppresses that behavior. This flag also affects the output of the-fdiagnostics-show-template-tree
flag.
- -felide-type#
Default setting; overrides
-fno-elide-type
.
- -fdiagnostics-path-format=KIND#
Specify how to print paths of control-flow events for diagnostics that have such a path associated with them.
KIND
isnone
,separate-events
, orinline-events
, the default.none
means to not print diagnostic paths.separate-events
means to print a separate ‘note’ diagnostic for each event within the diagnostic. For example:test.c:29:5: error: passing NULL as argument 1 to 'PyList_Append' which requires a non-NULL parameter test.c:25:10: note: (1) when 'PyList_New' fails, returning NULL test.c:27:3: note: (2) when 'i < count' test.c:29:5: note: (3) when calling 'PyList_Append', passing NULL from (1) as argument 1
inline-events
means to print the events ‘inline’ within the source code. This view attempts to consolidate the events into runs of sufficiently-close events, printing them as labelled ranges within the source.For example, the same events as above might be printed as:
'test': events 1-3 | | 25 | list = PyList_New(0); | | ^~~~~~~~~~~~~ | | | | | (1) when 'PyList_New' fails, returning NULL | 26 | | 27 | for (i = 0; i < count; i++) { | | ~~~ | | | | | (2) when 'i < count' | 28 | item = PyLong_FromLong(random()); | 29 | PyList_Append(list, item); | | ~~~~~~~~~~~~~~~~~~~~~~~~~ | | | | | (3) when calling 'PyList_Append', passing NULL from (1) as argument 1 |
Interprocedural control flow is shown by grouping the events by stack frame, and using indentation to show how stack frames are nested, pushed, and popped.
For example:
'test': events 1-2 | | 133 | { | | ^ | | | | | (1) entering 'test' | 134 | boxed_int *obj = make_boxed_int (i); | | ~~~~~~~~~~~~~~~~~~ | | | | | (2) calling 'make_boxed_int' | +--> 'make_boxed_int': events 3-4 | | 120 | { | | ^ | | | | | (3) entering 'make_boxed_int' | 121 | boxed_int *result = (boxed_int *)wrapped_malloc (sizeof (boxed_int)); | | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | | | | | (4) calling 'wrapped_malloc' | +--> 'wrapped_malloc': events 5-6 | | 7 | { | | ^ | | | | | (5) entering 'wrapped_malloc' | 8 | return malloc (size); | | ~~~~~~~~~~~~~ | | | | | (6) calling 'malloc' | <-------------+ | 'test': event 7 | | 138 | free_boxed_int (obj); | | ^~~~~~~~~~~~~~~~~~~~ | | | | | (7) calling 'free_boxed_int' | (etc)
- -fdiagnostics-show-path-depths#
This option provides additional information when printing control-flow paths associated with a diagnostic.
If this is option is provided then the stack depth will be printed for each run of events within
-fdiagnostics-path-format=inline-events
. If provided with-fdiagnostics-path-format=separate-events
, then the stack depth and function declaration will be appended when printing each event.This is intended for use by GCC developers and plugin developers when debugging diagnostics that report interprocedural control flow.
- -fno-show-column#
Do not print column numbers in diagnostics. This may be necessary if diagnostics are being scanned by a program that does not understand the column numbers, such as dejagnu.
- -fshow-column#
Default setting; overrides
-fno-show-column
.
- -fdiagnostics-column-unit=UNIT#
Select the units for the column number. This affects traditional diagnostics (in the absence of
-fno-show-column
), as well as JSON format diagnostics if requested.The default
UNIT
,display
, considers the number of display columns occupied by each character. This may be larger than the number of bytes required to encode the character, in the case of tab characters, or it may be smaller, in the case of multibyte characters. For example, the character ‘GREEK SMALL LETTER PI (U+03C0)’ occupies one display column, and its UTF-8 encoding requires two bytes; the character ‘SLIGHTLY SMILING FACE (U+1F642)’ occupies two display columns, and its UTF-8 encoding requires four bytes.Setting
UNIT
tobyte
changes the column number to the raw byte count in all cases, as was traditionally output by GCC prior to version 11.1.0.
- -fdiagnostics-column-origin=ORIGIN#
Select the origin for column numbers, i.e. the column number assigned to the first column. The default value of 1 corresponds to traditional GCC behavior and to the GNU style guide. Some utilities may perform better with an origin of 0; any non-negative value may be specified.
- -fdiagnostics-escape-format=FORMAT#
When GCC prints pertinent source lines for a diagnostic it normally attempts to print the source bytes directly. However, some diagnostics relate to encoding issues in the source file, such as malformed UTF-8, or issues with Unicode normalization. These diagnostics are flagged so that GCC will escape bytes that are not printable ASCII when printing their pertinent source lines.
This option controls how such bytes should be escaped.
The default
FORMAT
,unicode
displays Unicode characters that are not printable ASCII in the form<U+XXXX>
, and bytes that do not correspond to a Unicode character validly-encoded in UTF-8-encoded will be displayed as hexadecimal in the form<XX>
.For example, a source line containing the string
before
followed by the Unicode character U+03C0 (‘GREEK SMALL LETTER PI’, with UTF-8 encoding 0xCF 0x80) followed by the byte 0xBF (a stray UTF-8 trailing byte), followed by the stringafter
will be printed for such a diagnostic as:before<U+03C0><BF>after
Setting
FORMAT
tobytes
will display all non-printable-ASCII bytes in the form<XX>
, thus showing the underlying encoding of non-ASCII Unicode characters. For the example above, the following will be printed:before<CF><80><BF>after
- -fdiagnostics-format=FORMAT#
Select a different format for printing diagnostics.
FORMAT
istext
,sarif-stderr
,sarif-file
,json
,json-stderr
, orjson-file
.The default is
text
.The
sarif-stderr
andsarif-file
formats both emit diagnostics in SARIF Version 2.1.0 format, either to stderr, or to a file namedsource.sarif
, respectively.The
json
format is a synonym forjson-stderr
. Thejson-stderr
andjson-file
formats are identical, apart from where the JSON is emitted to - with the former, the JSON is emitted to stderr, whereas withjson-file
it is written tosource.gcc.json
.The emitted JSON consists of a top-level JSON array containing JSON objects representing the diagnostics. The JSON is emitted as one line, without formatting; the examples below have been formatted for clarity.
Diagnostics can have child diagnostics. For example, this error and note:
misleading-indentation.c:15:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 15 | if (flag) | ^~ misleading-indentation.c:17:5: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if' 17 | y = 2; | ^
might be printed in JSON form (after formatting) like this:
[ { "kind": "warning", "locations": [ { "caret": { "display-column": 3, "byte-column": 3, "column": 3, "file": "misleading-indentation.c", "line": 15 }, "finish": { "display-column": 4, "byte-column": 4, "column": 4, "file": "misleading-indentation.c", "line": 15 } } ], "message": "this ‘if’ clause does not guard...", "option": "-Wmisleading-indentation", "option_url": "https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wmisleading-indentation", "children": [ { "kind": "note", "locations": [ { "caret": { "display-column": 5, "byte-column": 5, "column": 5, "file": "misleading-indentation.c", "line": 17 } } ], "escape-source": false, "message": "...this statement, but the latter is ..." } ] "escape-source": false, "column-origin": 1, } ]
where the
note
is a child of thewarning
.A diagnostic has a
kind
. If this iswarning
, then there is anoption
key describing the command-line option controlling the warning.A diagnostic can contain zero or more locations. Each location has an optional
label
string and up to three positions within it: acaret
position and optionalstart
andfinish
positions. A position is described by afile
name, aline
number, and three numbers indicating a column position:display-column
counts display columns, accounting for tabs and multibyte characters.byte-column
counts raw bytes.column
is equal to one of the previous two, as dictated by the-fdiagnostics-column-unit
option.
All three columns are relative to the origin specified by
-fdiagnostics-column-origin
, which is typically equal to 1 but may be set, for instance, to 0 for compatibility with other utilities that number columns from 0. The column origin is recorded in the JSON output in thecolumn-origin
tag. In the remaining examples below, the extra column number outputs have been omitted for brevity.For example, this error:
bad-binary-ops.c:64:23: error: invalid operands to binary + (have 'S' {aka 'struct s'} and 'T' {aka 'struct t'}) 64 | return callee_4a () + callee_4b (); | ~~~~~~~~~~~~ ^ ~~~~~~~~~~~~ | | | | | T {aka struct t} | S {aka struct s}
has three locations. Its primary location is at the ‘+’ token at column 23. It has two secondary locations, describing the left and right-hand sides of the expression, which have labels. It might be printed in JSON form as:
{ "children": [], "kind": "error", "locations": [ { "caret": { "column": 23, "file": "bad-binary-ops.c", "line": 64 } }, { "caret": { "column": 10, "file": "bad-binary-ops.c", "line": 64 }, "finish": { "column": 21, "file": "bad-binary-ops.c", "line": 64 }, "label": "S {aka struct s}" }, { "caret": { "column": 25, "file": "bad-binary-ops.c", "line": 64 }, "finish": { "column": 36, "file": "bad-binary-ops.c", "line": 64 }, "label": "T {aka struct t}" } ], "escape-source": false, "message": "invalid operands to binary + ..." }
If a diagnostic contains fix-it hints, it has a
fixits
array, consisting of half-open intervals, similar to the output of-fdiagnostics-parseable-fixits
. For example, this diagnostic with a replacement fix-it hint:demo.c:8:15: error: 'struct s' has no member named 'colour'; did you mean 'color'? 8 | return ptr->colour; | ^~~~~~ | color
might be printed in JSON form as:
{ "children": [], "fixits": [ { "next": { "column": 21, "file": "demo.c", "line": 8 }, "start": { "column": 15, "file": "demo.c", "line": 8 }, "string": "color" } ], "kind": "error", "locations": [ { "caret": { "column": 15, "file": "demo.c", "line": 8 }, "finish": { "column": 20, "file": "demo.c", "line": 8 } } ], "escape-source": false, "message": "‘struct s’ has no member named ..." }
where the fix-it hint suggests replacing the text from
start
up to but not includingnext
withstring
‘s value. Deletions are expressed via an empty value forstring
, insertions by havingstart
equalnext
.If the diagnostic has a path of control-flow events associated with it, it has a
path
array of objects representing the events. Each event object has adescription
string, alocation
object, along with afunction
string and adepth
number for representing interprocedural paths. Thefunction
represents the current function at that event, and thedepth
represents the stack depth relative to some baseline: the higher, the more frames are within the stack.For example, the intraprocedural example shown for
-fdiagnostics-path-format=
might have this JSON for its path:"path": [ { "depth": 0, "description": "when 'PyList_New' fails, returning NULL", "function": "test", "location": { "column": 10, "file": "test.c", "line": 25 } }, { "depth": 0, "description": "when 'i < count'", "function": "test", "location": { "column": 3, "file": "test.c", "line": 27 } }, { "depth": 0, "description": "when calling 'PyList_Append', passing NULL from (1) as argument 1", "function": "test", "location": { "column": 5, "file": "test.c", "line": 29 } } ]
Diagnostics have a boolean attribute
escape-source
, hinting whether non-ASCII bytes should be escaped when printing the pertinent lines of source code (true
for diagnostics involving source encoding issues).